Towing - Suzuki Ertiga Series Owner's Manual

EMERGENCY SERVICE
(1)
4
1
2
3
(3)
(2)
EXAMPLE
71LS30801
3) Make jump lead connections as follows:
1. Connect one end of the first jump
lead to the positive (+) terminal of
the flat battery (1).
2. Connect the other end to the positive
(+) terminal of the booster battery
(2).
3. Connect one end of the second jump
lead to the negative (–) terminal of
the booster battery (2).
4. Make the final connection to an
unpainted, heavy metal part (i.e.
engine mount bracket (3)) of the
engine of the vehicle with the flat
battery (1).
8-7
WARNING
Never connect the jump lead directly
to the negative (–) terminal of the dis-
charged battery, or an explosion may
occur.
CAUTION
Connect the jump lead to the engine
mount bracket securely. If the jump
lead disconnects from the engine
mount bracket because of vibration
at the start of the engine, the jump
lead could be caught in the drive
belts.
4) If the booster battery you are using is
fitted to another vehicle, start the
engine of the vehicle with the booster
battery. Run the engine at moderate
speed.
5) Start the engine of the vehicle with the
flat battery.
6) Remove the jump leads in the exact
reverse order in which you connected
them.

Towing

If you need to have your vehicle towed,
contact a professional service. Your dealer
can provide you with detailed towing
instructions.
NOTICE
To help avoid damage to your vehicle
during towing, proper equipment and
towing procedures must be used.
2-Wheel Drive (2WD) Automatic
Transaxle
Automatic transaxle vehicles may be
towed using either of the following meth-
ods.
1) From the front, with the front wheels
lifted and the rear wheels on the
ground. Before towing, make sure that
the parking brake is released.
2) From the rear, with the rear wheels
lifted and a dolly under the front wheels.
NOTICE
Towing your vehicle with the front
wheels on the ground can result in
damage to the automatic transaxle.
60MK1-82E