Suzuki Ertiga Series Owner's Manual page 67

BEFORE DRIVING
Thermometer
When the ignition mode is "ON", the dis-
play (A) shows the thermometer.
The thermometer indicates the outside
temperature.
EXAMPLE
( a )
If the outside temperature nears freezing,
the mark (a) will appear on the display.
NOTE:
• The outside temperature indication is not
the actual outside temperature when
driving at low speed, or when stopped.
• If there is something wrong with the ther-
mometer, or just after the engine switch
is pressed to change the ignition mode
to "ON", the display may not indicate the
outside temperature.
2-53
When the display (C) shows the driving
range, you can change the unit of tem-
perature.
To change the unit of temperature, while
pushing and holding the trip meter selector
knob (1), turn the indicator selector knob
(2).
EXAMPLE
68LM258
NOTE:
When you reconnect the negative (–) ter-
minal to the battery, the unit of temperature
will be reinitialized. Change the unit again
to your preference.
Transaxle selector position indicator
EXAMPLE
When the ignition mode is "ON", the dis-
play (B) indicates the gear position (b).
(Initial
For details on how to use the transaxle,
setting)
refer to "Using the Transaxle" in the
"OPERATING YOUR VEHICLE" section.
Trip meter / Instantaneous fuel con-
sumption / Average fuel consumption /
Driving range
When the ignition mode is "ON", the dis-
play (C) shows one of the following five
68LM259
indications, trip meter A, trip meter B,
Instantaneous fuel consumption, Average
fuel consumption or Driving range.
To switch the display indication (C), push
the trip meter selector knob (1) or the indi-
cator selector knob (2) quickly.
( b)
68LM260
60MK1-82E