Suzuki Ertiga Series Owner's Manual page 144

EXAMPLE
Correct Wrong
NOTICE
• When pulling the ignition coils out,
do not pull on the cable. Pulling on
the cable can damage it.
• When servicing the iridium/plati-
num spark plugs (slender center
electrode type plugs), do not touch
the center electrode, as it is easy to
damage.
78K179
NOTICE
• When installing the spark plugs,
screw them in with your fingers to
avoid stripping the
Tighten with a torque wrench to 18
Nm (1.8 kg-m, 13.5 lb-ft). Do not
allow contaminants to enter the
engine through the spark plug
holes when the plugs are removed.
• Never use spark plugs with the
wrong thread size.
INSPECTION AND MAINTENANCE
Loosen
0.95 – 1.05mm
Tighten
(0.037 – 0.041 in.)
60G160S
NOTICE
When replacing spark plugs, you
should use the brand and type speci-
threads. fied for your vehicle. For the speci-
fied plugs,
"SPECIFICATIONS" section at the
end of this book. If you wish to use a
brand of spark plug other than the
specified plugs, consult your SUZUKI
dealer.
80G093
refer to the
7-12
60MK1-82E