Suzuki Ertiga Series Owner's Manual page 16

Immobilizer System
This system is designed to help prevent
vehicle theft by electronically disabling the
engine starting system.
The engine can be started only with your
vehicle's original keyless push start system
remote controller which has an electronic
identification code programmed into it. The
remote controller communicates the identi-
fication code to the vehicle when the
engine switch is pressed to change the
ignition mode to "ON". If you need to make
spare keys or remote controllers, see your
SUZUKI dealer. The vehicle must be pro-
grammed with the correct identification
code for the spare. A key made by an ordi-
nary locksmith will not work.
If the immobilizer/keyless push start sys-
tem warning light blinks when the ignition
mode is "ON", the engine will not start.
If this light blinks, change the ignition mode
to "LOCK" (OFF), then change back to
"ON". Also refer to "If the "PUSH" indicator
light blinks and the engine cannot be
started" in "Starting the Engine (Vehicle
with Keyless Push Start System)" in the
"OPERATING YOUR VEHICLE" section.
If the light still blinks after the ignition mode
is changed back to "ON", there may be
something wrong with your key or with the
immobilizer system. Ask your SUZUKI
dealer to have the system inspected.
The immobilizer/keyless push start system
warning light may also blinks if the remote
controller is not in the vehicle when you
close the door or attempt to start the
engine.
NOTE:
• If you lose your remote controller, see
your SUZUKI dealer as soon as possible
to have the lost one deactivated, then
have the new remote controller made by
them.
• If you own other vehicles with immobi-
lizer keys, keep those keys away from
the engine switch when using your
SUZUKI, or the engine may not be
started because they may interfere with
your SUZUKI's immobilizer system.
• If you attach any metal objects to the
80JM122 remote controller, it may not start the
engine.
BEFORE DRIVING
NOTICE
The remote controllers are sensitive
electronic instruments. To avoid
damaging them:
• Do not expose them to impacts,
moisture or high temperature such
as on the dashboard under direct
sunlight.
• Keep them away from magnetic
objects.
This immobilizer system, model 37290-
79M0 is in compliance with the essential
requirements and other provisions of the
Directive 1999/5/EC.
60MK1-82E
2-2