Suzuki Ertiga Series Owner's Manual page 48

Installation with Lap-Shoulder Seat
Belts
NOTICE
Before installing a child restraint sys-
tem in the rear seat, raise the head
restraint to the most upper position.
ELR type belt
EXAMPLE
Install your child restraint system accord-
ing to the instructions provided by the child
restraint system manufacturer.
Make sure that the seat belt is securely
latched.
Try to move the child restraint system in all
directions to make sure it is securely
installed.
Installation with a Lap Belt
EXAMPLE
Install your child restraint system accord-
ing to the instructions provided by the child
restraint system manufacturer.
To lengthen or tighten the belt, refer to the
"Lap-belt" item in this "Seat Belts and
Child Restraint Systems" section. After
making sure that the seat belt is securely
80JC021
latched, try moving the child restraint sys-
tem in all directions, to make sure it is
securely installed. If you need to tighten
the belt, pull the free end of the webbing.
Seat Belt Pretensioner System
and/or
Pull to tighten
Label
60G132
WARNING
This section of the owner's manual
describes your SUZUKI's SEAT BELT
PRETENSIONER
read and follow ALL these instruc-
tions carefully to minimize your risk
of severe injury or death.
BEFORE DRIVING
EXAMPLE
63J269
SYSTEM. Please
2-34
60MK1-82E