Table of Contents
Advertisement
Maintenance
(Continued)
Cleaning of the hand drying area (Cleaning of the black wall area)
About once every week
Black wall area
1
Draining and cleaning the drain tank
Before it fills up (at least once a week)
The water blown off hands is called "drain water."
Empty the drain tank at least once a week so that it does not reach the full line.
If the drain tank is not emptied it will start smelling.
1
Full water tank
2
3
6
Drain tank
Lid
Drain tank
Drain collection outlet
●
Sensor's sensitivity may be reduced if the black wall area is
fouled in white. Clean the area at least once a week
according to the Maintenance and cleaning of the exteriors.
Pull the drain tank out horizontally.
●
Make sure the drain water does not spill out.
1. Open the lid and empty the drain water.
2. Wash out the interior of the drain tank.
3. Replace the lid and then the entire drain tank to its
original location.
●
Insert it securely all the way in the unit.
Pour 200p (around 1 cup) of water through the drain
hole. (To prevent it from getting clogged.)
●
Do this only after checking that the drain tank is in place.
(Empty beforehand the water accumulated in the drain tank)
●
After repeating operations several times, make sure to empty the water
accumulated in the drain tank.
Advertisement
Table of Contents
