Declaration Of Conformity - HDG Euro 30 Operation Manual

9 Declaration of Conformity

Producer:
HDG Bavaria GmbH, Heating system for wood
Siemensstraße 22
D-84323 Massing
Resident of the EC authorized to assemble the adequate technical documentation:
Stefan Holfelder
HDG Bavaria GmbH, Heating system for wood
Siemensstraße 22
D-84323 Massing
Description and identification of the machinery:
Product:
Type:
We definitely declare hereby that the machinery complies with each and every relevant provision of
the following EC Directives:
2006/42/EC:2006-05-17
2006/95/EC:
2004/108/EC:
97/23/EC:
In accordance with section 2 of article 7 the applied harmonized regulations are to be found under:
EN 60335-1:2002
EN ISO 12100-1:2003-11
EN ISO 12100-2:2003-11
EN 60204-1:2006-06
EN ISO 14121-1:2007
Further technical standards and specifications applied are to be found under:
EN 303-5:1999
Massing, 13.03.2013
--------------------------------------------------------------------------------------------------------------------------------------------
Place, date
EC Declarationof Conformity
in accordance with Section A of Part 1 of Annex II of the
EC Directive 2006/42 on machinery
HDG Euro V3.0
HDG Euro 30V3.0/40V3.0/45V3.0/50V3.0
EC Directive on machinery 2006/42/EC
(Low Voltage Directive) Directive of the European Parliament and of the Council of 12 December 2006 on
the harmonisation of the laws of Member States relating to Electrical Equipment designed for use within
certain voltage limits (codified version) (1)
Directive 2004/108/EC of the European Parliament and of the Council of 15 December 2004 on the
approximation of the laws of the Member States relating to electromagnetic compatibility and repealing
Directive 89/336/EEC
(Pressure Equipment) Directive 97/23/EC on the approximation of the laws of the Member States
concerning pressure equipment
Household and similar electrical appliances Safety - Part 1: General requirements
Safety of machinery ― Basic concepts, general principles for design -
Part 1: Basic terminology, methodology
Safety of machinery ― Basic concepts, general principles for design - Part 2: Technical principles
Safety of Machinery - Electrical Equipment of Machines - Part 1: General requirements
Safety of machinery –Risk assessment - Part 1: Principles (ISO 14121-1:2007)
Part 5: Heating boilers for solid fuels, hand and automatically fired, nominal heat output of up to 300 kW.
Terminology, requirements, testing and marking
9 Declaration of Conformity
Signature
Martin Ecker
CEO
83