Cleaning And Servicing The Heating System; Cleaning And Servicing Schedule - HDG Euro 30 Operation Manual

7 Cleaning and servicing the
heating system
G
ENERAL INFORMATION
S
PARE PARTS

7.1 Cleaning and servicing schedule

Interval
Weekly / as required
Monthly (during the heating
period, approx. 240 operating
hours)
Every 6 months (approx. 900
operating hours)
Annually (approx. 1800
operating hours)
7 Cleaning and servicing the heating system – Cleaning and servicing schedule
To ensure fault-free and safe operation, certain cleaning and
maintenance work is necessary. This effort will also help you avoid
expensive repairs, provided you observe the recommended
intervals.
The cleaning and maintenance work can also be performed by an
authorised specialist heating company where a servicing contract
has been concluded.
Only use genuine HDG spare parts. You can obtain HDG spare parts
from your specialist heating company.
The specified cleaning intervals are guidelines.
These intervals may vary according to the quality of the fuel and the
power used by the heating system.
Component
• Clean fuel chamber and ash compartment
• Inspect pneumatic springs
• Clean heat exchanger surfaces and combustion
chamber
• Clean burner nozzle
•
Cleaning the flue gas pipe
• Cleaning the lambda sensor
•
Cleaning the flue gas temperature sensor
• Cleaning primary air inlets
• Cleaning the flue gas fan
•
Cleaning the air control unit
• Inspecting the door seals for leaks
•
Cleaning the ignition fan
Table 7/1 - Cleaning and servicing schedule
See page ...
65
68
69
71
72
73
74
74
75
76
77
79
63