Cleaning The Burner Nozzle - HDG Euro 30 Operation Manual

7 Cleaning and servicing the heating system – Procedure
Figure 7/11 - Removing the flue ash
9. Place the flue ash removal plate (1) on the threaded rod for the
flue ash door.
10.Place the ash pan (2) under the flue ash removal plate (1).
11.Use the scraper to sweep the flue ash into the ash pan (2).
12.Empty the flue ash into a fireproof container.
13.Close the boiler in the reverse order.
✓
The cleaning of the heat exchanger surfaces and combustion
chamber is completed.
C
LEANING THE BURNER NOZZLE
Important!
✎
Observe the "Generally applicable safety instructions" in this
section.
1. Allow the fire in the boiler to burn out and cool off.
2. Open the fuel chamber door.
✎
See "Cleaning the fuel chamber" in "Cleaning the fuel chamber
and ash compartment" in this section.
1
2
71