Extron electronics PVS 407D User Manual page 61

2. Type a new name in the file name field and press Enter. The name is updated.
To delete an audio file from the library:
Select and right-click on an audio file. From the drop down menu, select Delete.
To play an audio file:
Select an audio file and either click the Play icon
select Play from the drop down menu.
To copy an audio file to a device:
Select an audio file form the library list and either drag and drop the file onto a device ID
slot (1-20), or right-click on an audio file and select Copy to Device from the drop
down menu.
NOTES:
• If the slot already has an audio file and is copied to, the existing audio file is
overwritten by the new file.
• If an audio file already exists on the device list and is copied again with the same
name, an error message appears and the file is not copied over.
Click Cancel Changes to remove the recently copied file from the device list. This
removes all files copied to the device and not synced.
To remove an existing audio file from the device:
Select an audio file on the device list and right-click. Select Remove from the drop down
menu. The file is removed from the list. It can be added from the library at a later time.
Figure 37. Audio Files Management in the Device
To move an audio file within the device list:
Select an audio file on the device list and either use the up and down arrows at the
bottom of the list, or right-click and select Move Row Up or Move Row Down, as
desired, from the drop down menu.
To play an audio file from the device list:
Select an audio file and either click the Play icon
Playback on PVS from the drop-down menu.
NOTE: Audio files in the device list cannot be played until the device is synced (see
sync the device, on the next page).
To save an existing listed audio file to the audio library:
Select an audio file on the device list and right-click. Select Save to Library from the
drop-down menu. The file is saved to the audio library.
PVS 407D • Using Extron Product Configuration Software
, or right-click on an audio file and
or right-click and select Trigger
To
55 55