Extron electronics PVS 407D User Manual page 36

Polevault digital switcher
Hide thumbs Also See for PVS 407D:
Table of Contents

Advertisement

Command
VoiceLift Pro Chime Setting
Set audible chime
View audible chime
X3&
= Audible Chime
KEY:
VoiceLift Pro Reset
NOTE:
VLR 302 receiver reboots itself after reset is complete.
Absolute System Reset, but
retains microphone pairing
Absolute System Reset
NOTE:
This reset is same as first reset, except microphone pairing is cleared.
Reboot Device
V
VoiceLift Pro Feedback Supressor
Set feedback suppressor
View feedback suppressor
X4#
KEY:
= Feedback suppressor
Special Function Commands
Set Line out mode
Set Line out to variable
Set Line out to fixed
View Line out mode
ASCII Command
Response
(host to switcher)
(switcher to host)
E
X3&
Chim
CHIM}
or Chim*E25
or Chim*E14
E
X3&]
CHIM}
or E25
or E14
Verbose mode 2/3
Chim
or Chim*E25
or Chim*E14
0 = Off/disable
1 = On/enable (default)
E25 = Device not present/detected
E v1*0RSTD}
Rstd • v1*0]
or Rstd*E25
or Rstd*E14
E
}
Rstd • v1*1]
v1*1RSTD
or Rstd*E25
or Rstd*E14
E
}
Rstd • v1*9]
v1*9RSTD
or Rstd*E25
or Rstd*E14
E
X4#
Fsen
FSEN}
or E25
or E14
E
X4#]
FSEN}
or Fsen*E25
or Fsen*E14
Fsen
Verbose mode 2/3
or Fsen*E25
or Fsen*E14
0
= Off/disable (Default)
1 = On/enable
E25 = Device not present/detected
55*1#
LineOut*1
55*2#
LineOut*2
55#
LineOut*X
X3&]
]
]
]
]
X3&]
]
]
]
]
]
]
]
]
X4#]
]
]
]
]
X4#]
]
]
]
]
]
PVS 407D • SIS Communication and Control
Additional Description
Default is On.
Device is not present.
VLR 102 detected, expected VLR 302.
View audible chime status.
Device is not present.
VLR 102 detected, expected VLR 302.
Reset the system, but keep pairing.
Device is not present.
VLR 102 detected, expected VLR 302.
Reset to factory default.
Device is not present.
VLR 102 detected, expected VLR 302.
Device reboot
Device is not present.
VLR 102 detected, expected VLR 302.
Default is Off.
Device is not present.
VLR 102 detected, expected VLR 302.
View feedback suppressor status.
Device is not present.
VLR 102 detected, expected VLR 302.
Where 1 = variable (default).
Where 2 = fixed.
Where X = 1 (variable, default),
or 2 (fixed).
30

Advertisement

Table of Contents
loading

Table of Contents