MTU 20V4000M93 series Operating Instructions Manual page 193

Draining oil
u Remove plug screw (2) with sealing ring (1)
and drain off oil into a suitable container.
Removing automatic oil filter
Note: Clean interface between automatic oil filter
and coolant distribution housing.
1. Attach automatic oil filter (1) to crane with a
lightly tensioned lifting strap.
2. Remove screws (2).
3. Remove automatic oil filter (1) from coolant
distribution housing (3).
4. Collect any oil that runs out.
5. Remove O-rings (4).
6. Seal openings on coolant distribution housing
(3) with suitable covers.
MS150048/05E 2018-03 | Oil Filtration / Cooling | 191