MTU 20V4000M93 series Operating Instructions Manual page 178

2. Screw in screws (1) and tighten to specified tightening torque using a torque wrench .
Name
Screw
3. Install coolant vent line and coolant lines on compressor housing.
4. Install intake housing (3) with actuating cylin-
der (2).
5. Align clamp (1) and tighten to specified torque using a torque wrench.
Name
Clamp
6. Install oil lines (2). Tighten screw-fitting union at actuating cylinder to specified torque using a torque
wrench.
Name
Screw-fitting union
7. Install charge-air pipework (1) between exhaust turbocharger and intercooler.
8. Install air filter (→ Page 180).
9. Fill with engine coolant (→ Page 229).
176 | Exhaust Turbocharger | MS150048/05E 2018-03
Size Type
M10x18 Tightening torque
Size Type
Tightening torque
Size Type
10 G 1/4 Tightening torque
A
Lubricant Value/Standard
(Engine oil) 44 Nm ± 6.5 Nm
Lubricant Value/Standard
15 Nm + 2 Nm
Lubricant Value/Standard
(Engine oil) 40 Nm + 4 Nm