Twist Pitch Control Cable Replacement - WACKER Group CT 30 Series Repair Manual

2 GUIDE HANDLE
2.4

Twist Pitch Control Cable Replacement

Disassembly:
1. Remove two retaining nuts
(d)
cable .
2. Disengage cable from fork
(c)
pulley .
3. Remove two M8 screws
(b)
base . Carefully pull handle and control cable away
from handle base.
4. Remove M6 screw
(m)
M6 screw from underside of handle.
5. Pull Twist Control assembly
(k)
from handle.
(h)
6. Drive roll pin from Twist Control assembly.
Remove cable.
2-4
(f)
from the pitch control
(e)
and slide through
(a)
holding handle to handle
(g)
from handle. Remove
(j)
and pitch control cable
TROWEL REPAIR
a
b
a
c
d
f
g
m
e
1013SD53
h
j
k
1001RM03