Renesas SuperH E10A-USB Series User Manual page 48

Table 2.13 Display Status (cont)
Item
Condition match
flag
Condition match
flag for sequential
break
42
Example Description
A=0 Displays whether the channel A condition of the UBC has
been satisfied.
When the UBC is used as a Break Condition, it displays
whether Break Condition 6 has been satisfied.
0: Not satisfied
1: Satisfied
B=0 Displays whether the channel B condition of the UBC has
been satisfied.
When the UBC is used as a Break Condition, it displays
whether Break Condition 5 has been satisfied.
0: Not satisfied
1: Satisfied
BC1=0 Displays whether Break Condition 1 has been satisfied.
0: Not satisfied
1: Satisfied
BC2=0 Displays whether Break Condition 2 has been satisfied.
0: Not satisfied
1: Satisfied
BC3=0 Displays whether Break Condition 3 has been satisfied.
0: Not satisfied
1: Satisfied
BC4=0 Displays whether Break Condition 4 has been satisfied.
0: Not satisfied
1: Satisfied
A=0 When the sequential break condition of the UBC is
selected, this bit is 1 when the channel A condition has
been satisfied and the channel B condition has not been
satisfied.
When the UBC is used as a Break Condition, channel A
and channel B correspond to Break Condition 6 and Break
Condition 5, respectively. This bit is 1 when Break
Condition 6 has been satisfied and Break Condition 5 has
not been satisfied.
BC4=0 When Sequential break condition 4-3-2-1 is selected, this
bit is 1 when Break Condition 4 has been satisfied and
Break Condition 3 has not been satisfied. It is also 1 when
Break Condition 4 is satisfied again after Break Condition 3
has been satisfied.