Description Of Supply; Labeling And Identification - Culligan Aqua-Cleer MFP 4-44-MD 400 User's & Technical Manual

Table 1
Max.
Model flow
Min. flow
MFP 4- rate,
rate, inlet
44 MD treated
water l/h
MD water
(1) l/h
400 2000 400
800 2000 800
1200 3600 1200
1600 3600 1600
2200 5500 2000
2800 5500 2400
3300 5500 2800
(1) Average values calculated according to the following conditions: water temperature 20°C; operating pressure 200 or 261 psi (14 or 18 bar);
recovery ratio 75%; raw H
(2) Max. values calculated according to the following conditions: water temperature 10°C; operating pressure 200 or 261 psi (14 or 18 bar) according
to the models; reject recirculation completely closed and no longer new modules.

DESCRIPTION OF SUPPLY

Components:
1 main unit
4 vibration dampers
8 plain washers
4 nuts
3 fuses for phase change
Photo No. 1

LABELING AND IDENTIFICATION

The equipment to which this instruction manual belongs is identified
by the indications given on the labels.
Two types of labels are used, i.e. the two placed on the outside of
the equipment packing (on opposite sides), and the one placed on
the outside of the frame on the back.
Given below are the photos showing the position of the labels and
examples of labels used, with the meaning of the data or symbols
on them.
4
Max.
Membrane
flow Voltage
max. feed
rate,
in V
water
drain
3 L
pressure
water +N
psi (bar)
(2) l/h
+PE
1685 200 (14) 380-415
1370 200 (14) 380-415
2655 200 (14) 380-415
2340 200 (14) 380-415
3925 261 (18) 380-415
3610 261 (18) 380-415
3295 261 (18) 380-415
O salinity 500 ppm NaCl; product H
2
Aqua-Cleer MFP 4-44 - MD – User
Electrical connections
Max.
Max. absorpt
Frequency
input ion
in Hz
in KW (Imax)
50 1.6 3.5
50 1.6 3.5
50 2.3
50 2.3
50 4.2 8.5
50 4.2 8.5
50 4.2 8.5
O pressure 0 bar; new modules.
2
Photo No. 2: Position of identification label on packing
Figure 1: Example of identification label on outside of packing
Meaning of data and symbols given on the identification label on
outside of packing:
1. manufacturer's mark,
2. name and address of manufacturer,
3. name and model of equipment,
4. manufacturer's equipment model catalogue number,
5. date of manufacture,
6. manufacturer's univocal serial number identifying the equipment,
7. symbol indicating storage information,
8. equipment min. and max. storage temperature in °C,
9. symbol indicating storage information,
10. type of marking.
Dimensions in mm
Heigh
Width Depth
t
A
500 660 1550
500 660 1550
5 500 660 1550
5 500 660 1550
500 660 1800
500 660 1800
500 660 1800
M006-06 – Rev. 01 – 05/2012
Approx.
shipment
weight
in kg
115
140
170
190
220
250
280