Culligan Aqua-Cleer MFP 4-44-MD 400 User's & Technical Manual page 3

Symbols given in this manual and their meaning:
ATTENTION
N.B. (NOTA BENE)
ATTENTION
This instruction manual is an integral part of the equipment and is
intended for the user.
Culligan declines any liability for the consequences of operations not
complying with that given in this manual or carried out by unauthorized
persons.
ATTENTION
Any installation, maintenance or repair work on the systems must be carried out by Authorized Culligan Service

Center personnel.
The room where the systems, ancillary material and consumable products are located must meet the safety, use and

storage requirements of the current regulations.
The water produced by every unit must only be used for its specifically intended purpose. Culligan declines any

liability for the consequences of improper use of the water produced by its equipment.
Any equipment operation fault not envisaged in this manual must be promptly reported to the Authorized Culligan

Service Center. Culligan declines any liability for the consequences of prolonged use of a unit having faults that were
not reported.
When necessary, the choice, dosing and handling of chemicals must be carried out according to the instructions given

in this manual and in compliance with the Technical Safety Sheets of the single products used. Culligan declines any
liability for the consequences of using different products or, for those given in this manual, in concentrations
different from those specified.
Do not tamper with the equipment. Any maintenance or repair work not envisaged in this manual is likewise

prohibited.
Packing, consumable materials, etc., and waste produced by the equipment must be disposed of in compliance with

the current regulations.
M006-06 – Rev. 01 – 05/2012
VERY IMPORTANT INFORMATION REGARDING THE SAFETY OF
THE PATIENT OR OPERATOR, OR INDICATIONS PROVIDED IN
ORDER TO PREVENT EQUIPMENT FAILURES. READ CAREFULLY
BEFORE USING THE EQUIPMENT.
Important information
equipment. Read carefully before operating on the equipment.
Aqua-Cleer MFP 4-44 - MD – User
regarding correct operation of the