Culligan Aqua-Cleer MFP 4-44-MD 400 User's & Technical Manual page 12

PROGRAMMING
EQUIPMENT PROGRAMMING CAN ONLY BE
CARRIED OUT BY AUTHORIZED CULLIGAN
SERVICE CENTER TECHNICIANS.
ATTENTION
FOR INFORMATION
VARIOUS
CONTACT THE LATTER. CULLIGAN DECLINES
ANY LIABILITY FOR MALFUNCTIONING OR
DAMAGE DUE TO PROGRAMMING CARRIED
OUT BY UNAUTHORIZED PERSONNEL.
MAINTENANCE
ANY MAINTENANCE OPERATIONS CARRIED
OUT BY THE USER WILL INVALIDATE ALL
WARRANTIES AND RELIEVE CULLIGAN OF
ATTENTION
ANY LIABILITY. IN THIS WAY CULLIGAN ALSO
GUARANTEES THE USE, WHEN NECESSARY,
OF ORIGINAL REPLACEMENT PARTS, WHICH
ARE THE
CORRECT OPERATION OF THE EQUIPMENT.
THE OWNER OF THE EQUIPMENT IS ADVISED
TO STIPULATE
CONTRACTS
S.p.A. OR AUTHORIZED SERVICE CENTERS
INDICATED BY THE LATTER.
8
REGARDING
PROGRAMMING POSSIBILITIES,
ONLY ONES ALLOWED
SPECIFIC MAINTENANCE
WITH CULLIGAN ITALIANA
Aqua-Cleer MFP 4-44 - MD – User
N.B.:
THE
DISPOSAL
Operations for disposing of the equipment or its parts must be carried
out in compliance with the requirements of Decree 152-2006.
Regarding the packing, plastic, elastomer and metal parts must be
eliminated as differentiated and/or disposal waste.
The osmosis membrane must be regarded as hazardous or non-
hazardous special waste, depending on the substances treated by it.
The electrical-electronic components must be disposed of in
compliance with the requirements of Leg. Decree 151-2005
FOR
The User must carry out the checks indicated in
Table E.
M006-06 – Rev. 01 – 05/2012