Vent Mount Option (B)
Attach the vent mount to the vehicle dock using the provided screws. (Figure 3)
To mount the vehicle dock using the vent mount option, install the vent mount as follows:
1.
If the vent louvers in your vehicle are recessed, you may need to use the longer vent
hooks with the vent mount. Refer to Figure 4 and install the longer vent hooks into the
vent mount. Be sure to observe the orientation of the vent hooks as shown.
Remove
End Cap
Slide Short
Vent Hooks Out
Figure 3
Figure 3
Slide Extended
Vent Hooks In
Figure 4
Figure 4
Replace
End Cap
[
]
15
Installation