Belkin OMNIGUARD F6C110-RKM-2U User Manual page 12

SOFTWARE FEATURES & INSTALLATION
4. Double-click on the
Uninterruptible Power
Supply service
5. Select the "Log On As:
This Account" button,
input the appropriate
account information,
and then click "OK".
6. Double-click on the
Control Panel's "Power
Options" icon.
22
SOFTWARE FEATURES & INSTALLATION
7. Select the UPS page,
and then click on
"Select..."
8. Choose "Generic"
from the "Select
manufacturer" pull-
down list, choose the
correct COM port, and
then click on "Next".
9. Click on the boxes, as
shown, and then
choose "Negative" for
the three voltage
settings. Click on
"Finish" to keep these
settings.
10. Click "OK" at the bottom of the "Power Options Properties" window
to finish.
23