User Speed Limit; Quiet Ride; Red Light Camera Quiet Ride - Uniden R3 User Manual

will reduce the volume to the level set (0 - 5) in the Auto Mute Volume menu (see
page 17).
If the current volume level is 0, the R3 will not change the volume to the Auto Mute
Auto Mute ends 10 seconds after the alarm ends unless:
• The same signal is detected within that 10 second period; then, Auto Mute stays
on.
• A different band signal is detected during that 10 second period; then, Auto Mute
turns off and then back on at the current volume level.

USER SPEED LIMIT

When you set a speed limit thorough the menus, the R3 sends an alarm tone if your
speed exceeds that speed limit setting. If that happens, the unit announces and
displays over speed warnings.

QUIET RIDE

This function mutes X and K band radar alarms when you drive under a speed limit
set in this menu (up to 90 mph/140 km/h). If X or K band signals are detected, the
unit beeps once in volume level one and then goes to volume level zero. Q-Ride
flashes in green on the OLED.
Ka and Laser bands are NOT muted. Mute Memory overrides Quiet Ride.

RED LIGHT CAMERA QUIET RIDE

This function mutes red light camera alarms when you drive over a speed limit set in
this menu (up to 85 mph or 140 km/h) page 13.
Volume level; it will keep the volume level at 0.
Auto Mute does not apply to Laser Alert.
K
55
mph
5 8
mph
24.120 GHz
Q-Ride
920 ft
- 26 -