User Speed Limit; Quiet Ride; Maintenance; Maintaining The Equipment - Uniden R3 User Manual

Long range radar/laser detector
Hide thumbs Also See for R3:
Table of Contents

Advertisement

USER SPEED LIMIT

When you set a speed limit thorough the menus, the R3 sends an alarm tone if your speed exceeds that speed
limit setting. If that happens, the unit announces and displays over speed warnings.

QUIET RIDE

This function mutes X and K band radar alarms to zero volume when you drive under a speed
menu (up to 90 mph). Q-Ride flashes in green on the LCD.
Ka and Laser bands are NOT muted. Mute Memory overrides Quiet Ride.

MAINTENANCE

MAINTAINING THE EQUIPMENT

The R3 requires very little physical maintenance. Wipe it with a soft cloth to keep dust from accumulating. Check
the power cord connections to keep them clean and free of corrosion.

UPDATING THE FIRMWARE/DATABASE

Uniden recommends that you update your R3 firmware and database periodically. Go to www.unidensupport.
com, find your model, and check if you have the latest firmware.

TROUBLESHOOTING

IF...
The unit won't turn on.
No display or audio.
The unit alarms when the vehicle hits bumps.
The unit alarms briefly in the same location but
no radar source was in view.
The R3 did not alert when a police car was in
view.
The vehicle starts but the R3 does not turn on.

SPECIFICATIONS

Receiver Type:
Radar
Double Conversion Superheterodyne
Self-Contained Antenna
Laser
Pulsed Laser Signal Receiver
Frequency:
X
10.525 GHz
K
24.150 GHz
TRY THIS...
Check the connections. Be sure they are all secure.
x If no display, check the connections. Be sure they are all
secure.
x If no audio, check if Voice is turned off.
Check the connections. Be sure they are all secure.
There may be a motion sensor or house alarm in use within
range.
• The officer may not have radar/laser units turned on.
• Check that the band is turned on. Press MENU and cycle
through the options to get to the bands. If the band is
turned off, the LCD will show OFF. Turn the band on.
• Verify that the power cord is securely connected to the
unit and inserted into the cigarette lighter jack.
• Change the fuse in the power cord (spare fuse not
included). Unscrew the cigarette lighter plug to access the
fuse.
Antenna Type:
Radar
Laser
Front
Back
Dimensions
Weight
- 15 -
limit
set in this
Linear Polarized E-vector
Vertical
Convex Condenser Lens
Concave Condenser Lens
110.00 mm (D) x 69.00 mm
(W) x 29.50 mm (H)
6 oz (170g)

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents