Quick Guide - Philips ColourChaser Touch Installation Manual

LRC9611 ColourChaser Touch
Quick guide - Instruction for use
Real time adjustment of presets
• Use the scroll wheel for real time adjustment of the speed of a dynamic scene, or adjustment of the C, I and S parameters when button is active.
When the ColourChaser Touch stops ticking, the wheel has reached the end of its range.
• Changes to a static color or dynamic scene can be saved by pressing and holding the preset button until the controller sounds once, and cleared
by pressing and holding until the controller sounds twice (automatically restores the original stored scene).
I
Although this information has been prepared with extreme care, no rights
can be derived from any information and illustration in this manual.
3222 636 42310
December 2007
On/Off - Default white
Press on/off button to set all lights directly to default white
Color Temperature
Without I, C or S active the touch wheel can be used for direct
access to adjust color temperature
Color
C
Press C and turn the touch wheel to adjust color
Intensity
I
Press I and turn the touch wheel to adjust intensity
Saturation
S
Press S and turn the touch wheel to adjust color saturation
Presets
2 3 4
Press one of the numbered presets to select a static color or
dynamic scene (created by the ColourChaser Designer software)