Setup; Introduction; Software Installation - Philips ColourChaser Touch Installation Manual

Setup

Introduction

The included ColourChaser Designer software allows you to
• Configure the ColourChaser Touch for use with specific lighting fixtures,
• Create and load lighting designs, and
• Update fixture profiles and controller firmware.
This section describes how to configure the controller. Other features are described in the
ColourChaser Designer help file.

Software installation

ColourChaser Designer requires Windows XP.
Install the software as follows:
1 Place the CD-ROM in the drive. If autoplay is enabled, an installation dialog opens automatically
after loading the CD-ROM.
2 If the installation dialog does not open, you must run the boot.bat file on the CD-ROM. Select
Run from the Start menu, enter [CD-ROM drive letter]:boot.bat, and click OK.
3 From the installation menu, select whether you want to download and install the latest version
of the software from the Internet (recommended), or the version on the CD-ROM.
4 Review and acknowledge the user agreement. Click Next.
5 The installation wizard opens. Follow the instructions on screen to complete the process.
Philips ColourChaser Touch Manual 11