Installation - Philips ColourChaser Touch Installation Manual

Installation

6 Philips ColourChaser Touch Manual
Controller and bracket
The ColourChaser Touch is designed for wall mounting using the included bracket. To mount:
1 Loosen the set screw on the bottom of the
ColourChaser Touch with a 2 mm hex wrench
and remove the wall bracket.
2 Center the bracket on the desired mounting
position with the hooks pointing up.
3 Fasten the bracket to the wall with four
suitable screws (not included).
1
2mm hex
∅ 5 mm
No. 6 (∅ 3,5 mm)
2