Table of Contents
Advertisement
Frequency of the second channel in the channel plan is 471.250 MHz.
Name:
Channel type in the channel plan
Node:
ChType (1.3.6.1.4.1.32108.2.2.3.2.1.4)
Parameters:
INTEGER(Analog(0), QAM64(3), QAM128(4), QAM256(5), COFDM-QPSK(6),
COFDM-QAM16(7), COFDM-QAM64(8), Digital-unknown(255)), viewing only, list
Description:
View the modulation type of any channel in the channel plan.
Example:
ChType.2
The second channel in the channel plan is analog.
Measurement Results Table
Name:
Channel level
Node:
Level (1.3.6.1.4.1.32108.2.2.3.3.1.2)
Parameters:
INTEGER, viewing only, list
Description:
View the channel level for analog channels and actual channel power for digital
channels. The level value is expressed in (dBμV * 10).
Example:
Level.2
The level of the second channel is 65.7 dBμV.
Name:
Video/audio ratio of analog channel
Node:
VAR (1.3.6.1.4.1.32108.2.2.3.3.1.3)
Parameters:
INTEGER, only viewing, list
Description:
View the value of video/audio ratio for analog channel. The value is expressed in
(dB * 10). For digital channels the value is always set to 0.
Example:
VAR.2
The video/audio ratio of the second channel is 8.5 dB.
Name:
Signal/noise ratio of analog channel
Node:
CNR (1.3.6.1.4.1.32108.2.2.3.3.1.4)
Parameters:
INTEGER, viewing only, list
Description:
View the value of signal/noise ratio for analog channel. The value is expressed in
(dB * 10). For digital channels the value is always set to 0.
Example:
CNR.2
The signal/noise ratio of the second channel is 43.2 dB.
Name:
MER value of digital channel
Node:
MER (1.3.6.1.4.1.32108.2.2.3.3.1.5)
Parameters:
INTEGER, viewing only, list
Description:
View MER value for digital channel. The MER value is expressed in (db * 10). If
synchronization with the channel is not achieved, the 0 value is indicated. For
analog channels the value is always set to 0.
Example:
MER.3
MER value of the third channel is 32.2 dB.
Name:
Bit Error Rate value before Reed-Solomon decoder
Node:
preBER (1.3.6.1.4.1.32108.2.2.3.3.1.6)
Parameters:
INTEGER, viewing only, list
Description:
View preBER value for digital channel. The value is expressed as (preBER *
10^10). If synchronization with the channel is not achieved, 2^32-1 is indicated.
For analog channels the value is always set to 0.
Example:
preBER.3
The preBER value of the third channel is 1.1E-9.
0.
657.
85.
432.
322.
11.
25
Advertisement
Table of Contents
