Table of Contents
Advertisement
Activating your SIRIUS Subscription
Before you can listen to the SIRIUS service, you
need to subscribe to the SIRIUS Satellite Radio
service.
1. Be sure that the Receiver is correctly installed
and that the antenna is oriented to receive the
SIRIUS signal.
2. Press the power button to turn Receiver On.
After displaying the SIRIUS logo, the Receiver
will update the SIRIUS channel line up. The
display will show, "UPDATING CHANNELS" and
show the status of the update.
Updating Channels
X% Completed
Wait until the channel updates have completed
before pressing any buttons on the Receiver.
3. Once the channels have been updated, the
display will change to "Call 1-888-539-SIRIUS to
Subscribe" and will place you in SIRIUS Satellite
Radio's Preview Channel, channel 184.
You will not be able to tune to any other
ST2 Starmate Replay User and Installation Guide
channels until you activate your SIRIUS
subscription.
184
To Activate Call
To Activate Call
1-888-539-SIRIUS
1-888-539-SIRIUS
News
4. To listen to the audio from your Receiver, you will
need to tune the FM radio in your vehicle and the
FM transmitter in the Receiver to the same FM
frequency. The FM transmitter in the Receiver
defaults to 88.1 MHz, so you can begin by tuning
your FM radio to 88.1 MHz. If there is an FM station
broadcasting on that frequency, you will have to
search for a quiet frequency to use. Refer to the
section titled, FM Transmitter in this User Manual
for instructions on how to tune the FM transmitter
to other FM frequencies.
5. Use the channel up and down buttons to tune
the Receiver to channel 000 to display the
Receiver's unique 12-digit SIRIUS ID Number
(SID). You may also directly tune to channel 000
by pressing the Select button, pressing the 0
(zero) button, and pressing the Select button
Preview
12:00P
A
13
Advertisement
Table of Contents
