Table of Contents
Advertisement
transmitters.
To display the Signal Indicator screen, do the
following:
1. Use channel up and down buttons to highlight
"Signal Indicator", and press the select button.
Signal Indicator
SAT -
SAT -
TER -
TER -
2. Two 10 segment horizontal bar graphs will be
displayed with a "-" sign to the left and a "+" sign
to the right. SAT indicates the satellite signal
strength while TER indicates the terrestrial
signal strength, if a terrestrial signal is available.
To exit the Signal Indicator menu, press the MENU
button.
Factory Default
The Factory Default option will restore most every
feature of the Receiver to the original factory
settings. The following is a list of all features
affected by the Factory Default option:
54
+
+
+
+
Note that the Parental Control feature is not affected
by the Factory Default option. If a code has been set
for the Parental Control feature, the code will not be
reset by the Factory Default feature, preventing
someone from circumventing the Parental Control
feature. Channels which have been locked will
remain locked.
To activate the Factory Default feature, and restore
• All Presets are cleared
• All Game Alerts are cleared
• Receiver set to Normal Tuning Mode
• Display brightness set to 50%
• Display Contrast set to 50%
• FM Transmitter set to On
• FM Frequency set to 88.1 MHz
• All S-Seek memory cleared
• Clock set to 12-Hour Format
• Time Zone set to Eastern Standard Time
• Daylight Savings Time set to Observed
• Auto Shutdown set to Off
• Sleep Mode set to Off
• Auto Select set to Off
• Program Alert cleared
ST2 Starmate Replay User and Installation Guide
Advertisement
Table of Contents
