Activating Your Sirius Subscription - Sirius Satellite Radio Streamer GT SIR-SL1C User Manual

Activating your SIRIUS Subscription

Before you can listen to the Receiver, you must
subscribe to SIRIUS Satellite Radio's service.
1. Make sure that the Streamer GT Receiver is
properly connected and that its antenna is
oriented to receive the SIRIUS satellite signal.
2. Press the power button to turn the Receiver ON.
After displaying the SIRIUS logo, the Receiver
will update all the SIRIUS channels. The display
will read "UPDATING CHANNELS" on the top
line and "X% Completed" (0%-20%-40%-60%-
80%-100%) on the bottom line until the update
completes.
NOTE: Don't push any buttons or perform
any operations until updating has been
completed.
3. Once updated and the SIRIUS channels are
received, the display will change to "Call 1-888-
539-SIRIUS to Subscribe" and will place you
in SIRIUS Satellite Radio's Preview Channel.
Channel 184 is the SIRIUS preview channel. You
will not be able to tune to any other channels until
you activate your SIRIUS subscription.
Streamer GT SIR-SL1C User Guide
4. Using the channel up and down buttons, tune the
Receiver to channel 000 to display the Receiver's
unique 12-digit SIRIUS ID number (SID). You can
also tune to channel 000 by using the remote:
Press the Select button, then the 0 (zero) button,
and then the Select button again. (The SID
number can also be found on a sticker on your
Receiver.)
5. Write the number down and have your credit card
handy. A space has been provided at the end of
this manual to write your SID.
6. Have your credit card handy and contact SIRIUS
toll-free at:
1-888-9-SIRIUS (1-888-9-77)
9