Sirius Satellite Radio STAREMATE REPLAY ST2 User And Installation Manual page 47

If you should exit this prompt without entering a
code, you will be prompted to set a code the next
time you enter the Edit Code option.
To change the Parental Control code, do the
following:
1. Use the channel up and down buttons to
highlight "Edit Code", and press the select
button.
2. At the prompt, enter the four digit Parental
Control code.
3. If you did not enter the correct code, a message
will be displayed alerting you that the wrong
code was entered, and you will be prompted
again to enter the code.
ST2 Starmate Replay User and Installation Guide
Enter Code
# ____ # ____
Enter Code
# ____ # ____
Enter Code
Wrong Code
4. If the correct code was entered, the "New
Code" prompt will appear. Enter the new
Parental Control code.
New Code
5. You will then be prompted to confirm the new
code by entering it again.
Confirm Code
6. If you confirmed the correct code, the lock code
is now changed and a confirmation screen is
displayed. If you entered the wrong code at the
confirmation prompt, a screen will be displayed
to alert you that you have entered the wrong
code, and you will have to repeat the process
again.
# ____ # ____
# ____ # ____
47