Advertisement
of 6 feet. The roof may or may not be an ideal mounting location. Secure the main unit to the shaft of the mast holder. Use the right-angle
adaptor if the wind sensor will be mounted on a horizontal mast or surface.
Fasten the wind sensor to a suitable mast using the two U-bolts, washers and nuts included. Note: Mount the wind sensor onto a mast so
the wind can reach the sensor unobstructed from all directions for an accurate reading. The ideal mast is between 0.62" and 1.3" in diameter.
The wind sensor DOES NOT have replaceable batteries - it consumes solar power and charges the internal battery pack automatically.
Rain sensor
The rain sensor should be mounted on a level surface in an open area within the 200-foot wireless range of the thermo-hygro sensor and on
the same side of the house. Mount the rain sensor at least 6 feet off the ground level for optimum wireless transmission. The rain sensor
should be accessible to allow for periodic cleaning of debris or insects.
Thermo-Hygro Sensor
The thermo-hygro sensor is "weather resistant", but not "water proof". To ensure an extended life of your sensor, mount it in a semi-covered
place out of the elements. Minimum height is 6 feet; under the eaves on the North side of the house can be ideal to avoid the effects of
sunlight. Mount the sensor 18" down from the eaves to ensure optimum performance. This will assure the temperature of the air coming out
of the attic will not affect data collected by the sensor.
To wall mount the thermo-hygro sensor, fix the wall holder onto the desired wall using the included screws, plug the sensor firmly into the
wall holder and replace the rain cover if it is not already in place. Note: After mounting the units, if the weather data is not received, press
and hold the UP ARROW (▲) key for 2 seconds to synchronize the wireless display to the sensors.
You have the option of using your weather station as a:
1. Standalone weather station – no computer or USB transceiver required.
2. Computer-connected weather station - Connect the USB transceiver to your computer for use with Heavy Weather Pro PC
software (included in the package on CD-ROM). You can also download the latest version of the Heavy Weather Pro PC software
at www.lacrossetechnology.com/c86234
3. Computer-connected weather station with remote monitoring and alerts – Connect the USB transceiver to your computer for
use with Heavy Weather Pro PC software (included in the package on CD-ROM). You can also download the latest version of the
Heavy Weather Pro PC software at www.lacrossetechnology.com/c86234. The included Remote Monitoring and Alerts Activation
Card has instructions for downloading the La Crosse Alerts software and the needed activation key to enable this feature.
C86324 Display: 10.46" L x 1.35" W x 7.9" H
(265.8 L x 34.4 W x 201.3 H mm)
2 "C" batteries (included)
3.13" L x 3.54" W x 7.45" H
TX59UN-1-IT:
Thermo Hygro
(79.4 L x 89.8 W x 189.3 H mm)
2 "C" batteries (included)
TX58UN-IT Rain: 5.2" Dia. x 7.2" H
(131.6 Dia. x 182.7 H mm)
2 "AA" batteries (included)
The complete instruction manual is available at:
www.lacrossetechnology.com/c86234
Le manuel d'instruction complet est disponible sur:
www.lacrossetechnology.com/c86234
El manual de instrucciones completo está disponible en:
www.lacrossetechnology.com/c86234
Limited 1-year Warranty
Contact Support: 1-608-782-1610
Product Registration: www.lacrossetechnology.com/support/register
For warranty work, technical support, or information contact:
La Crosse Technology, Ltd
2817 Losey Blvd. S.
La Crosse, WI 54601
Computer Connection and Remote Monitoring / Alerts
Specifications
Miscellaneous
TX63U-IT Solar Powered Wind:
9.84" L x 5.74" W x 7.57" H
(250 L x 145.9 W x 192.3 H mm)
Integrated power-cell included
3.2" L x .89" W x .35" H
USBTRX10:
(81.8 L x 22.7 W x 9 H mm)
Powered by PC
FCC DISCLAIMER
This device complies with part 15 of the FCC rules. Operation is subject to the
following two conditions:
(1) This device may not cause harmful interference.
(2) This device must accept any interference received, including interference that
may cause undesired operation.
NOTE: THE MANUFACTURER IS NOT RESPONSIBLE FOR ANY RADIO OR
TV INTERFERENCE CAUSED BY UNAUTHORIZED MODIFICATIONS TO THIS
EQUIPMENT. SUCH MODIFICATIONS COULD VOID THE USER'S
AUTHORITY TO OPERATE THE EQUIPMENT.
4
EJMA2814L210
Printed in China
Advertisement
