Beko BRVPF 090 User Manual page 10

2 Unit specifications and features
• W ireless control (some units)
Wireless control allows you to control your air conditioner using your mobile phone and a Wireless
connection.
For the USB device access, replacement, maintenance operations must be carried out by
professional staff.
• L ouver angle memory (some units)
When turning on your unit, the louver will automatically resume its former angle.
For a detailed explanation of your unit' s advanced functionality (such as TURBO mode and its self-
cleaning functions), refer to the Remote Control Manual.
Note:
C
Illustrations in this manual are for explanatory purposes. The actual shape of your
indoor unit may be slightly different. The actual shape shall prevail.
• S etting angle of air flow
Setting vertical angle of air flow
While the unit is on, use the SWING/DIRECT button to set the direction (vertical angle) of airflow.
1. Press the SWING/DIRECT button once to activate the louver. Each time you press the button, it
will adjust the louver by 6°. Press the button until the direction you prefer is reached.
2. To make the louver swing up and down continuously, press and hold the SWING/DIRECT button
for 3 seconds. Press it again to stop the automatic function.
Setting horizontal angle of air flow
The horizontal angle of the airflow must be set manually. Grip the deflector rod (See Fig.B) and
manually adjust it to your preferred direction.
For some units, the horizontal angle of the airflow can be set by remote control, please refer to the
Remote Control Manual.
Note on louver angles
When using COOL or DRY mode, do not set louver at too vertical an angle for long
periods of time. This can cause water to condense on the louver blade, which will drop
on your floor or furnishings. (See Fig.A)
C
When using COOL or HEAT mode, setting the louver at too vertical an angle can reduce
the performance of the unit due to restricted air flow.
Do not move louver by hand. This will cause the louver to become out of sync. If this
occurs, turn off the unit and unplug it for a few seconds, then restart the unit. This will
reset the louver.
10 / 52 EN
Splıt-type room air conditioner / User Manual