Connecting The Board For I/O Operations; Connectors, Cables - Main I/O Connector - Measurement Computing PCI-DIO24H User Manual

PCI-DIO24H User's Guide

Connecting the board for I/O operations

Connectors, cables – main I/O connector
Table 2-1 lists the board connector type, applicable cables, and compatible accessory products for the PCI-
DIO24H.
Connector type
Compatible cables
Compatible accessory products with the
C37FF-x or C37FFS-x cable
Pin out – main I/O connector
The I/O connector is a 37-pin, male D-type connector accessible from the rear of the computer through the
expansion backplate. The signals available are direct connections to the digital I/O chips as well as the
computer's internal power supplies. The pin out is identical to the CIO-DIO24, except that −5 VDC is not
brought out. The PCI-DIO24H board's I/O connector is shown in Fi
Information on signal connections
General information regarding signal connection and configuration is available in the Guide to Signal
Connections. This document is available on our web site at www.mccdaq.com/signals/signals.pdf.
Table 2-1. Board connectors, cables, and accessory equipment
37-pin D-type
! C37FF-x unshielded ribbon cable. x = length in feet. (see Figure 2-2)
! C37FFS-x shielded round cable. x = length in feet. (see Figure 2-3)
SCB-37
CIO-MINI37
CIO-MINI37-VERT
CIO-ERB08
CIO-SERB08
CIO-ERB24
CIO-SPADE50
SSR-RACK08
SSR-RACK24
Figure 2-1. PCI-DIO24H board connector pin out
gure 2-1 .
2-3
Installing the PCI-DIO24H