Window Kit And Exhaust Hose Installation Instructions; Preparations For Installing The Window Kit; Window Kit Installation Instructions - EdgeStar AP10002BL Owner's Manual

Hide thumbs Also See for AP10002BL:

Table of Contents

Window Kit and Exhaust Hose Installation Instructions

You must vent your portable air conditioner when running it in cooling mode. Your unit includes a

window exhaust kit that can be used to vent the unit out of a window.

Before you begin, make sure that you have all the parts necessary for installation and that a

suitable location is picked.

If you have multiple windows, choose one that is near an electrical outlet that will be able to

provide sufficient power to your unit. See the power requirements listed on the product label

printed on the side, or on the back of your portable air conditioner.

Your window kit can be installed on a horizontal or vertical sliding window as shown in the

following images.

Please follow the installation instructions carefully to avoid personal injury or damage.

Note: You may need to contact your electrician if your room's circuit is not able to power your

unit.

Step 1

Cut the foam seal B to the proper length and attach it to the windowsill.

Step 2

Attach the window exhaust adapter C to the window panel opening on the inside.

Table of Contents