Optional Ut-105 Instajlation - Icom IC-F1020 Instruction Manual

• Optional UT-1 05 installation
The optional UT-105 provides SmarTrunk IJTM functions. In-
stall the unit as follows:
CD
Turn power OFF, then disconnect the DC power cable.
o
Unscrew the 4 screws, then remove the bottom cover.
®
Install the unit as shown in the diagram below.
®
Replace the bottom cover and screws, then the DC power
cable.
NOTE: The sponge supplied with the UT-105 is for the
IC-F30/F40 series transceivers only.
CONNECTION AND INSTALLATION
3
12