Husqvarna R 418Ts AWD Operator's Manual page 5

(2) is used to move rearward. The product brakes when
the pedals are released.
Lift lever for hydraulic lift of the cutting
deck
The lift lever for hydraulic lift is used to lift the cutting
deck to the transport position and to lower the cutting
deck to the mow position. The hydraulic lift uses
hydraulic pressure and the engine must be started for
the lift to operate.
When the lift lever is moved to the transport position, the
blades stop to rotate in approximately 5 seconds.
When the lift lever is moved to the mow position, the
blades start to rotate.
If you need to lift or lower the cutting deck when the
engine is off and there is no hydraulic pressure, use the
mechanical lift lever.
Lift lever for mechanical lift of the
cutting deck
The lift lever for mechanical lift is used to lift and lower
the cutting deck when hydraulic pressure is not
522 - 002 -
1
2
available. It can also be used to mechanically lock the
cutting deck in the transport position.
Pull the lift lever rearward to lift the cutting deck to the
transport position. If the engine is on, the blades stop to
rotate after approximately 5 seconds.
Note: The lift lever for mechanical lift must be in the
transport position for the engine to start.
Press the lock button and move the lift lever forward to
lower the cutting deck to the mow position. If the engine
is on, the blades start to rotate.
Note: If the cutting deck does not lower, it has probably
been lifted with the lift lever for hydraulic lift. See
lever for hydraulic lift of the cutting deck on page 5 .
Cutting deck
The cutting decks for this product are Combi cutting
decks with BioClip. BioClip cuts the grass into fertilizer.
The Combi cutting decks can also be used without
BioClip. Without BioClip the grass is ejected to the rear.
Symbols on the product
WARNING: Careless or incorrect use can
result in serious injury or death to the
operator or others.
Read the operator's manual carefully and
make sure that you understand the
instructions before use.
Rotating blades. Keep body parts away from
the cover when the engine is on.
Lift
5