Fitting The Wall Bracket - Seca 869 Instruction Manual

Fitting the wall bracket

The display part is intended for mounting on the wall. Use the mounting material supplied
to do so.
– Screw the wall bracket to the wall as
shown.
Be aware that you have a length of 2 m
of cable between the scale and the dis-
play part.
The cable may not contact the weighing
platform during weighing, as this might
falsify the result.
– Push the display onto the wall bracket.
– If you want to change the location of the
scale, take the display out of the wall
bracket and push it into the bracket on
the weighing platform to transport it.
4