Desk-Top Stand; Wall Bracket; Power Supply - Seca Pragma 883 Instruction Manual And Guarantee

Desk-top stand

– Position the desk-top stand on the dis-
play casing from underneath.
The broad side must be located at the
top of the display. The desk-top stand
locks in position.
– Place the display casing on a desk-top.

Wall bracket

– Place the desk-top stand on the display
casing from underneath.
The narrow side must be located at
the top of the display. The desk-top
stand locks in position.
– Fit the wall bracket to the wall at the de-
sired height.
– Push the display casing onto the wall
bracket.

Power supply

The scale is powered exclusively by batteries. The scale works independently of the
mains, which is very handy for mobile use.
The LC display has a low power consumption – 80.000 weighing operations can be per-
formed with one set of batteries. When the battery voltage is no longer adequate,
appears in the display.
– Carefully turn over the scale so that the
base of the scale is accessible.
– Push the battery compartment closure
towards "Battery" and open the cover.
– Connect the cable to the holder and
batteries.
– Place the holder in the battery com-
partment.
– Close the cover and then turn the scale
back up the right way.
20
bAtt