Troubleshooting, Support, And Warranty; Troubleshooting - Belkin PLAY N600 User Manual

troublesHootiNG, suPPort, aND WarraNtY

troubleshooting

the setup CD does not automatically start.
if Belkin setup does not run when you insert the cD-rOM, your
computer may not be configured to open cDs automatically .
if Belkin setup does not appear within 15 seconds, browse
to your cD-rOM drive and open the "Belkin setup" icon .
alternatively, you may visit http://router/
setup manually . Please see "Manual setup using Your
Browser" earlier in this manual for more information .
and perform the
belkin setup cannot find my router.
if Belkin setup is not able to communicate with your router during
the installation process, please check the following items .
1 . Make sure that the wireless hardware on your
computer is turned on, if available .
2 . try connecting your computer to one of the four "wired"
ports on the router with an ethernet cable .
3 . ensure that the router is on . the front-panel light should be on .
4 . unplug the router's power supply for 10
seconds, then plug it back in .
5 . there may be firewall software on your computer preventing
an outgoing connection . You may choose to temporarily
disable this software before attempting setup .
if Belkin setup still cannot find the router, you might choose
to do a manual setup . refer to "Manually configuring
network settings" in this manual for details .
24