troublesHootiNG, suPPort, aND WarraNtY
belkin setup cannot connect my router to the internet.
if Belkin setup is not able to connect the router to
the internet, please check the following items:
1 . use the troubleshooting suggestions within Belkin setup .
2 . if your isP requires a user name and password, make sure that
you have typed in your user name and password correctly . some
user names require that the isP's domain may be at the end of the
name . example: "myname@myisp .com" . the "@myisp .com" part of
the user name may need to be typed as well as your user name .
3 . if you continue to have no internet connection, refer
to "Manually configuring network settings" in this
manual for an alternative setup method .
belkin setup completed installation, but i cannot browse the
Web. the light on the front of my router is blinking amber.
1 . Make sure the router is connected to your aDsl line with an
rJ11 (telephone) cable via the router's one gray aDsl port .
2 . check that the modem (aDsl) connection is
connected to your broadband (aDsl) socket on the
wall (via an aDsl filter if one is required) .
3 . unplug your router's power supply, wait 10 seconds,
and plug it back in . this will cause the router to try to
reestablish communication with the aDsl line .
25