Troubleshooting, Support, And Warranty - Belkin F9K1112 v1 User Manual

Troubleshooting, Support, and Warranty

Troubleshooting
The Setup CD does not automatically start.
If Belkin Setup does not run when you insert the CD‐ROM, your
computer may not be configured to open CDs automatically.
If Belkin Setup does not appear within 15 seconds, browse to your
CD‐ROM drive and open the "Belkin Setup" icon. Alternatively, you
may visit http://router/ and perform the setup manually. Please
see "Manual Setup Using Your Browser" earlier in this manual for
more information.
Belkin Setup cannot find my Router.
If Belkin Setup is not able to communicate with your Router during
the installation process, please check the following items.
1) Make sure that the wireless hardware on your computer is turned
on, if available.
2) Try connecting your computer to one of the four "wired" ports on
the Router with an Ethernet cable.
3) Ensure that the Router is on. The front‐panel light should be on.
4) Unplug the Router's power supply for 10 seconds, then plug it back
in.
5) There may be firewall software on your computer preventing an
outgoing connection. You may choose to temporarily disable this
software before attempting setup.
If Belkin Setup still cannot find the Router, you might choose to do
a manual setup. Refer to "Manually Configuring Network Settings"
in this manual for details.
Belkin Setup cannot connect my Router to the Internet.
If Belkin Setup is not able to connect the Router to the Internet,
please check the following items:
1) Use the troubleshooting suggestions within Belkin Setup.