Belkin PLAY N600 User Manual page 31

troublesHootiNG, suPPort, aND WarraNtY
a printer i plugged into the usb port is
not showing up on my computer.
1 . is the light on over the usB port that the printer is plugged into?
if not, try unplugging and re-plugging the printer . Please check
that the usB connector is firmly plugged into the router .
2 . to print to a printer attached to the router, your
computer must have that printer's driver installed .
Please check that the driver is installed .
3 . the printer may not be set to auto-connect . Via the Belkin router
Manager, open the usB Print and storage center . check that the
printer appears in the list of available devices . View the properties
of the printer, and check that "auto-connect" is selected .
a different sort of usb device that i plugged into the
usb port is not showing up on my computer.
Most usB devices other than disks and printers must be
accessed via the usB Print and storage center .
1 . is the light on over the usB port that the device is plugged into?
if not, try unplugging and re-plugging the device . Please check
that the usB connector is firmly plugged into the router .
2 . Via the Belkin router Manager, open the usB
Print and storage center . check that the device
appears in the list of available devices .
3 . select the device and click the "use" button . the device will be
virtually connected to your computer until you choose to "stop
using" the device, or another person requests use of the device .
31