GettiNG starteD
adding Computers to Your Network
Wireless devices such as computers, network printers, and gaming
systems can connect to your router with a few simple steps .
using the CD
1 . Put the setup cD into your computer . if the cD
doesn't open automatically, browse to your cD
drive and open the Belkin setup cD icon .
2 . click the setup icon on the cD menu .
3 . after a brief installation, the setup software will ask you for the
network name and password from the network information card
that came with your router . this card is most likely now located
underneath the foot of your router in the provided card slot .
4 . a progress screen will appear while additional software is
installed . this may take a few minutes to complete . Once
finished, a "success" message will appear indicating that you
are connected to the internet via your new Belkin router .
Note: the setup software runs only on
Windows and Mac Os X systems .
11