Landa VHP Series Operator's Manual
  1. Manuals
  2. Brands
  3. Landa Manuals
  4. Pressure Washer
  5. VHP Series
  6. Operator's manual

Landa VHP Series Operator's Manual

Hot water - electric powered - lp gas heated
Hide thumbs
Table of Contents

Advertisement

Quick Links

VHP Series
Hot Water - Electric Powered - LP Gas Heated
Operator's Manual
USE VAPOR FUEL ONLY
Pressure Washer
MODELS:
VHP2-1500
1.109-556.0
VHP3-2000
1.109-557.0
For the Landa Dealer nearest
you, consult our web page at
www.landa.com
8.913-949.0-T
®
06/06/17

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the VHP Series and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Landa VHP Series

Summary of Contents for Landa VHP Series

  • Page 1 ® VHP Series Hot Water - Electric Powered - LP Gas Heated Operator’s Manual Pressure Washer USE VAPOR FUEL ONLY MODELS: VHP2-1500 1.109-556.0 VHP3-2000 1.109-557.0 For the Landa Dealer nearest you, consult our web page at www.landa.com 8.913-949.0-T 06/06/17...

  • Page 2: Machine Data Label

    Machine Data Label Landa VHP 2-1500 / 3-2000 Operator’s Manual 8.913-949.0 - T...

  • Page 3: Table Of Contents

    Parts Landa VHP Left......26 Landa VHP Right ......27 Hose &...

  • Page 4: How To Use This Manual

    It contains replacement parts numbers needed for ordering future parts. NOTE: The manual part number is located on the lower right corner of the front cover. Landa VHP 2-1500 / 3-2000 Operator’s Manual 8.913-949.0 - T...

  • Page 5: Safety

    When ordering parts, please specify model and serial number. Use only identical replacement parts. This machine is to be used only by trained opera- tors. Landa VHP 2-1500 / 3-2000 Operator’s Manual 8.913-949.0 - T...

  • Page 6: Important Safety Information

    HOT DISCHARGE FLUID: attached to protect the operator. machine with wet hands or while standing in water. DO NOT TOUCH OR DIRECT DISCHARGE Always disconnect power before servicing. STEAM AT PERSONS. Landa VHP 2-1500 / 3-2000 Operator’s Manual 8.913-949.0 - T...
  • Page 7 25. When making repairs disconnect from electrical 14. Inlet water must be clean fresh water and no hotter source and shut off gas valve. then 90°F. 26. Install this machine on non combustible flooring. Landa VHP 2-1500 / 3-2000 Operator’s Manual 8.913-949.0 - T...
  • Page 8 WARNING: Do not spray machine WARNING or any people, animals or elec- trical parts. DO NOT SPRAY MACHINE OR ANY PEOPLE, ANIMALS OR ELECTRICAL PARTS. Follow the maintenance instructions specified in the manual. Landa VHP 2-1500 / 3-2000 Operator’s Manual 8.913-949.0 - T...

  • Page 9: Propane Tank Safety Instructions

    Propane tanks, gas bottles will not be picked up by local garbage collectors. Improper propane tank disposal might be illegal in some areas. Propane tank disposal is a safety issue that is easily handled by a propane company. Landa VHP 2-1500 / 3-2000 Operator’s Manual 8.913-949.0 - T...

  • Page 10: Operations

    Wand Rest Propane Hose LP Tank (not included) Brass Soap Nozzle GFCI LP Shelf Trigger Nozzle Quick Coupler Variable Pressure Spray Gun Control Handle Variable High Pressure Pressure Wand Hose Landa VHP 2-1500 / 3-2000 Operator’s Manual 8.913-949.0 - T...

  • Page 11: Installation

    The gas pressure coming out of the regulator and going to the burner ring has been factory set for elevations of 0 to 2000 ft. Altitudes greater than 2000 ft will require adjustments to the gas manifold pressures. Landa VHP 2-1500 / 3-2000 Operator’s Manual 8.913-949.0 - T...
  • Page 12 2 cubic foot test dial and allowing 5 minutes to show any movement, or by soaping each pipe connection and watching for bubbles. If a leak is found, make the necessary repairs and repeat the above test. Landa VHP 2-1500 / 3-2000 Operator’s Manual 8.913-949.0 - T...

  • Page 13: Check Water Heater Coil For Leaks

    Is the incoming gas supply pressure to the machine between 6-14 water column inches or 1/2 psig? Landa VHP 2-1500 / 3-2000 Operator’s Manual 8.913-949.0 - T...

  • Page 14: Assembly Instructions

    Propane Hose STEP 4: Check oil level by using STEP 5: Connect propane hose to supplied dip-stick. Use SAE 10W- a propane tank. 40 non-detergent only. Landa VHP 2-1500 / 3-2000 Operator’s Manual 8.913-949.0 - T...

  • Page 15: Operating Instructions

    Pressure Nozzle NOTE: High pressure nozzle must be inserted at end of wand to obtain high pressure. To apply soap read Variable Pressure Trigger operator's manual. Control Handle Landa VHP 2-1500 / 3-2000 Operator’s Manual 8.913-949.0 - T...
  • Page 16 For hot water, turn the switch to the burner position and pull the trigger on the spray gun.To apply deter- gent, read section on Detergents and General Cleaning Techniques Landa VHP 2-1500 / 3-2000 Operator’s Manual 8.913-949.0 - T...

  • Page 17: Detergents & General Cleaning Techniques

    Select and install the minutes. desired high pressure nozzle. NOTE: You can also stop detergent from flowing by simply removing detergent siphon tube from bottle. Landa VHP 2-1500 / 3-2000 Operator’s Manual 8.913-949.0 - T...

  • Page 18: Maintenance

    STEP 4: Squeeze trigger on spray gun to relieve remaining pressure. Move safety latch into its locked position. Landa VHP 2-1500 / 3-2000 Operator’s Manual 8.913-949.0 - T...

  • Page 19: Storage

    After Extended Storage CAUTION: Prior to restarting, thaw out any possible ice from pressure washer hoses, spray gun or wand. Landa VHP 2-1500 / 3-2000 Operator’s Manual 8.913-949.0 - T...

  • Page 20: Maintenance And Service

    Oil should be maintained at that level. Landa VHP 2-1500 / 3-2000 Operator’s Manual 8.913-949.0 - T...

  • Page 21: Pressure Relief Valve

    If pressure from pump or thermal expansion should exceed safe limits, the rupture disk will burst, allowing high pressure to be discharged through hose to ground. When disk ruptures, it needs to be replaced. Landa VHP 2-1500 / 3-2000 Operator’s Manual 8.913-949.0 - T...

  • Page 22: Oil Change Record

    Oil Change Record Pump Oil - SAE 10W-40 (Non-foaming) Estimated Operating Estimated Operating Date Oil Changed Date Oil Changed Hours Since Last Oil Hours Since Last Oil Month/Day/Year Month/Day/Year Change Change Landa VHP 2-1500 / 3-2000 Operator’s Manual 8.913-949.0 - T...

  • Page 23: Troubleshooting

    Worn crankcase piston rod seals Replace seals. OF CRANKCASE LOUD KNOCKING Pulley loose on crankshaft Check key and tighten set screw. NOISE IN PUMP Broken or worn bearing Replace bearing. Landa VHP 2-1500 / 3-2000 Operator’s Manual 8.913-949.0 - T...
  • Page 24 Open valve (counterclockwise). WASHER WILL Burner not on Turn burner switch to "ON" position. NOT STEAM Coil dirty or sooty See coil maintenance section. Steam valve clogged Clean or replace. Landa VHP 2-1500 / 3-2000 Operator’s Manual 8.913-949.0 - T...

  • Page 25: Parts

    Parts Parts LANDA VHP 1.109-556.0 VHP2-1500 1.109-557.0 VHP3-2000 Landa VHP 2-1500 / 3-2000 Operator’s Manual 8.913-949.0 - T...

  • Page 26: Landa Vhp Left

    Landa VHP Left Electronic Ignition (Optional) View A-A Tank (Not Included, Optional) Landa VHP 2-1500 / 3-2000 Operator’s Manual 8.913-949.0 - T...

  • Page 27: Landa Vhp Right

    Landa VHP Right Detail See View A-A Electronic Ignition Option Landa VHP 2-1500 / 3-2000 Operator’s Manual 8.913-949.0 - T...
  • Page 28 NIPPLE, 1/2" JIC X 3/8" PIPE 9.802-767.0 SCREW, 3/8" X 3/4" WHIZ LOC 8.900-822.0 LABEL, VHP OPERATING INSTR. 8.706-984.0 ADAPTER, 1/2" X 1/2" PIPE 8.706-844.0 TEE 1/2" FEMALE, PIPE 8.706-797.0 NIPPLE, 1/2" HEX Landa VHP 2-1500 / 3-2000 Operator’s Manual 8.913-949.0 - T...
  • Page 29 HOLDER, WAND, VHW/VHP ZINC PLATED 9.803-029.0 TANK HEAD ASSEMBLY, 16" DIA X 8" STACK 9.800-006.0 LABEL, "HOT/CALIENTE" W/ARROWS 9.802-825.0 RETAINER CLIP 9.802-904.0 INSULATION, TANK HEAD 16" OD X 8" ID 8.912-899.0 HANDLE, VHW/VHP/MVP W/HNG Landa VHP 2-1500 / 3-2000 Operator’s Manual 8.913-949.0 - T...
  • Page 30 U-BOLT, 1/4" X 1-1/2" X 2-1/2" W/PLATE 8.706-108.0 NIPPLE, 3/4" X 3-1/2", BLACK PIPE 8.706-222.0 TEE, 3/4" NLK PIPE 9.802-018.0 NIPPLE, 3/4" X 3", BLACK PIPE 8.706-320.0 CAP, 3/4", BLACK PIPE Landa VHP 2-1500 / 3-2000 Operator’s Manual 8.913-949.0 - T...
  • Page 31 NUT, CAGE, 1/4" X 16 GA 8.706-294.0 BUSHING, 1/2 X 3/8 STEEL 8.755-957.0 STRAIN RELIEF, 3/4", 90DEG, BLK 9.802-427.0 2.75 FT CORD, SERV, 12/3, SEOOW, /FT 9.802-523.0 LOCKNUT, 3/4" CONDUIT 9.802-518.0 STRAIN RELIEF, STR, 3/4 Landa VHP 2-1500 / 3-2000 Operator’s Manual 8.913-949.0 - T...

  • Page 32: Hose & Spray Gun

    Hose & Spray Gun High Pressure Nozzle Landa VHP 2-1500 / 3-2000 Operator’s Manual 8.913-949.0 - T...
  • Page 33 NOZZLE, SAQCMEG, 15035,YELLOW (3-2000) 8.712-346.0 NOZZLE, SAQCMEG 1504, YELLOW (2-1100) 8.712-358.0 NOZZLE, SAQCMEG 1505.5 YELLOW (3-700) 8.707-139.0 COUPLER, 1/4"PLUG, MALE, STEEL/ZINC NOT SHOWN 9.802-164.0 COUPLER, 1/4"SOCKET, FEMALE, BRASS NOT SHOWN Landa VHP 2-1500 / 3-2000 Operator’s Manual 8.913-949.0 - T...

  • Page 34: Lb Series Pump

    SEE TABLE KITS 9.803-948.0 O-RING Ø1.78 X 18.77 SEE TABLE KITS 9.803-949.0 VALVE PLUG 8.754-851.0 PLUG, BRASS G1/4 8.718-973.0 WASHER, COPPER G1/4 8.754-854.0 BOLT, MANIFOLD M14 X 40 8.754-850.0 WASHER, LOCK Landa VHP 2-1500 / 3-2000 Operator’s Manual 8.913-949.0 - T...
  • Page 35 16 mm 16 mm Valve Seals ITEM NUMBERS 4, 6, 8 4, 5, 6, 7, 8 36, 37, 38, 39 12, 13, 14 INCLUDED NUMBER OF CYLINDERS KIT WILL SERVICE Landa VHP 2-1500 / 3-2000 Operator’s Manual 8.913-949.0 - T...

  • Page 36: Vrt3 Unloader

    PART NO. DESCRIPTION NOTES 8.750-713.0 OUTLET FITTING 8.750-712.0 KNOB, UNLOADER 8.750-709.0 REPAIR KIT, VRT3, 2320/3630 PSI 8.750-710.0 REPAIR KIT, VRT3, 4500 PSI (KIT ITEMS: 3, 4, 6, 9-12, 21, 24) Landa VHP 2-1500 / 3-2000 Operator’s Manual 8.913-949.0 - T...
  • Page 37 If “spike” pressure exceeds the 500 psi limit, remove the adjusting knob (Item 18) and re-adjust (lower) the nuts (Items 15) on the stem (Item 8). Re-attach the adjusting knob (Item 18), then repeat step #6. Landa VHP 2-1500 / 3-2000 Operator’s Manual 8.913-949.0 - T...

  • Page 38: Injector Assembly #2 - 4 - 011182

    Injector Assembly #2 - 4 - 011182 3-1100, 3-2000 Landa VHP 2-1500 / 3-2000 Operator’s Manual 8.913-949.0 - T...
  • Page 39 DESCRIPTION NOTES INJECTOR, DETERGENT, NON ADJUST, 9.802-215.0 #2, 2-3 GPM 6.390-126.0 CLAMP, HOSE, .46-, .54 ST 9.802-251.0 6 ft. TUBE, 1/4" X 1/2", CLEAR VINYL 8.707-057.0 STRAINER, 1/4", HOSE BARB Landa VHP 2-1500 / 3-2000 Operator’s Manual 8.913-949.0 - T...

  • Page 40: Spanish

    Landa. La sabe, causan cáncer, defectos de nacimiento, o información de advertencia debe ser enfatizada y daños al sistema reproductivo.
  • Page 41 Proveer siempre espacio y ventilación adecuados alrededor de estas unidades. 16. Durante las reparaciones, desconectar el sumin- istro eléctrico y cerrar la válvula de gas. Landa VHP 2-1500 / 3-2000 Operator’s Manual 8.913-949.0 - T...

  • Page 42: Instalacion

    Esta máquina, al ser instalada, debe ser puesta a tierra PRECAUCION: Al instalar la manguera de según las regulaciones municipales locales. Verificar el gas propano al Tanque de propano adecuado suministro de energía usando un voltímetro. Landa VHP 2-1500 / 3-2000 Operator’s Manual 8.913-949.0 - T...
  • Page 43 Observar el compartimiento del quemador con una lámpara o una linterna de mano. Si no se observa ninguna fuga, el goteo de agua del serpentín será Landa VHP 2-1500 / 3-2000 Operator’s Manual 8.913-949.0 - T...

  • Page 44: Instrucciones De Operacion

    250 psi y la temperatura aumentará aproximada- mente 250° F. 3. Después de usar vapor, girar la perilla del control en el descargador en el sentido de la agujas del Landa VHP 2-1500 / 3-2000 Operator’s Manual 8.913-949.0 - T...

  • Page 45: Mantenimiento Y Servicio

    Ocasionalmente, deben regularse para mantener la presión correcta. (Ver la sección del manual sobre válvulas de descarga para el proced- imiento correcto de regulación de la válvula.) Landa VHP 2-1500 / 3-2000 Operator’s Manual 8.913-949.0 - T...
  • Page 46 Este problema se puede remediar fácilmente al retirar la obstrucción. Si la presión de operación de la unidad es normal y la válvula de alivio sigue con fugas, reparar o reemplazar la válvula. Landa VHP 2-1500 / 3-2000 Operator’s Manual 8.913-949.0 - T...
  • Page 47 Los elementos dañinos pueden causar daño a la propiedad o lesiones graves. El conjunto de inyectores para productos detergentes de Landa se puede utilizar para hacer sifón y mezclar los detergentes. Apague el motor y cierre la entrada de agua.

  • Page 48: Identificacion De Componentes

    Tanque de Gas Propano (no se incluye) GFCI Manguera de Alta Presión Gatillo Pistola de Boquilla de Alta Rociado Presión Manija de Control de Presión Variable Varilla de Presión Variable Landa VHP 2-1500 / 3-2000 Operator’s Manual 8.913-949.0 - T...
  • Page 49 Nota Landa VHP 2-1500 / 3-2000 Operator’s Manual 8.913-949.0 - T...
  • Page 50 ® 8.913-949.0 • Printed in U.S.A.

This manual is also suitable for:

Vhp2-1500Vhp3-2000

Table of Contents