Specifications; Pressures; Temperatures; Thermostatic Shut-Down - Mira Coda Plus Installation & User Manual

Thermostatic bar valve
Table of Contents

Advertisement

Pressures

Max static Pressure:
Max Maintained Pressure:
Min Maintained Pressure: (Gas Water Heater):
performance supplies should be nominally equal.)
Min Maintained Pressure (Gravity system):
from cold tank base to shower handset outlet.)

Temperatures

Close temperature control is provided between
optimum Thermostatic Control range:
of 15°C cold, 65°C hot and nominally equal pressures.)
recommended Hot supply:
at temperatures up to 85°C for short periods without damage. However for
safety reasons it is recommended that the maximum hot water temperature is
limited to 65°C.)
Minimum recommended differential between Hot supply and outlet
Temperature: 10°C.
Cold Water range: up to

Thermostatic shut-down

For safety and comfort the thermostat will shut off the mixing valve
2 seconds if either supply fails (achieved only if the blend temperature has a
minimum differential of 12°C from either supply temperature).

Connections

Hot: Left
(side nearest flow control), 15 mm compression.
Cold: right
outlet: Bottom
note! This product does not allow for reversed inlets and will deliver unstable
temperatures if fitted incorrectly.

sPeCIFICATIons

10 Bar.
5 Bar.
60°C to 65°C. (note! The mixing valve can operate
25°C.
(side nearest temperature control), 15 mm compression.
, ½" BSP Male to flexible hose.
0.1 Bar. (0.1 bar = 1 Metre head
20°C and 50°C.
35°C to 45°C. (achieved with supplies
7
1.0 Bar. (for optimum
within

Advertisement

Table of Contents
loading

Table of Contents