Introduction Product Overview The SS-20 Indoor Siren will go off on-site, with a loud 104dB siren Back View with mounting plate & level sound, to deter any would-be intruders when a sensor of K1/K2 system has been triggered. It is smart to have 2-4 sirens strategically...
The Siren can be placed in any location as long as it is within the range with K1/K2 Hub Specifications Set the K1/K2 system to Test Model: SS-20 Mode, and then trigger the Siren Power: 3V CR123A Li-Mn battery x 4 pcs by pressing the Tampering Switch Sound: 104 Decibels on the back of the Siren.
FCC STATEMENT 1.This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: INFORMATION FOR THE USERS (1)This device may not cause harmful interference. At the end of its life, the device has to be separated from the other waste. Consign the (2)This device must accept any interference received, including interference that may device and all its components together to a center of electronical and electrotechnical cause undesired operation.
Page 4
INFORMATION FOR THE USERS At the end of its life, the device has to be separated from the other waste. Consign the device and all its components together to a center of electronical and electrotechnical waste recycling center, designated by your local authorities. INFORMATIONEN FUR DIE BENUTZER Das Gerat am Ende seiner Lebensdauer von den anderen Abfallen getrennt werden muss.
Need help?
Do you have a question about the SS-20 and is the answer not in the manual?
Questions and answers