Subscribe to Our Youtube Channel
Related Manuals for Smanos X500
Summary of Contents for Smanos X500
-
Page 1: User Manual
X500 GSM/SMS/RFID Touch Alarm System User Manual Printed in China PA: OI-X500-EN-1405-V1.0 2014 smanos. All rights reserved. -
Page 2: Table Of Contents
Contents Over view of X500 Alarm System ---------------------------------- Congratulations on buying this smanos X500 alarm system. Installing the smanos X500 Included accessories ------------------------------------------------------- alarm system is easy and quick. Before using the product we recommend reading the Operating principle of the alarm system ------------------------------------ manual first. - Page 3 Accessories ----------------------------------------------------------------- Setting up the Alarm System with the App -------------------------------------- 18~36 37~50 Request alarm system status by SMS --------------------------------------- Remote Control ------------------------------------------------------------- Over view Store emergency telephone numbers --------------------------------------- 19~20 Store emergency SMS numbers --------------------------------------------- Disarm Store SMS number for RFID tags --------------------------------------------- Store speed dial number ----------------------------------------------------...
-
Page 4: Overview Of X500 Alarm System
Overview of X500 Alarm System Included accessories The smanos X500 Alarm System has the following accessories included in the box: Front View - English manual - English quick guide Home mode Call Disarm RFID tag reader Play voice memo Touch screen... -
Page 5: Operating Principle Of The Alarm System
Sensors Operating principle of the alarm system The alarm system will receive a signal when a sensor is triggered. The control panel will sound the alarm and send a SMS to all stored phone numbers. When Sensor placement texting is done it will call stored phone numbers. When an optional external siren is, placed it will be send a signal to the siren. -
Page 6: Zone Mode Of Sensors
Zone mode of sensors Changing sensor name Each sensor can be placed in a zone mode. Four different zone mode can be selected. The supplied motion detector and door/window contact are by default paired with the alarm system. Every sensor is called a zone and every sensor will get it’s own zone The home mode zone, normal zone, 24 hour zone or single delay zone. -
Page 7: Getting Started
Getting Started Turning on the control panel Connect the power adapter to the connector in the back of the control panel. Then slide the power switch to “On“. Inserting SIM card Before inserting the SIM card, please perform the following steps: Network connection (indicator) Makesurethealarmsystemispoweredoff. -
Page 8: Control Panel Operation
Control Panel Operation Sending “ ? ? ” Control panel replies: Arming the system ‘5’ Store alarm phone No. Press . All the sensors will be activated. ‘6’ Store alarm SMS No. ‘7’ Store SMS No. for RFID tags Partially arming the system ‘8’... -
Page 9: Record And Play Back Voice Message
Record and play back voice message Speed dial Press the button for 2 seconds to record a When you press the button for 3 seconds, the system will dial the preset emergency personal message of up to 10 seconds. If your number immediately. -
Page 10: Disarming The Alarm System By Sms
If you want to arm the system, you only have to send a ”1” to the number of the SIM card in the control panel. Arming The language can also be set in the X500 Alarm App. System armed. Partially arming (home mode) the system by SMS If you want to partially arm the system you only have to send a ”2”... -
Page 11: Two-Way Talk
Adding an account Phone operation when receiving emergency call The alarm system can be operated with the X500 Alarm App. When using the Apple When the alarm system is alarming, the control panel will call the pre-stored App there will be set up a SMS text message automatically for every function. Press the emergency numbers. -
Page 12: X500 Alarm App Overview
System armed Record Entry and exit delay time: 0sec Two-way talk voice memo Single zone delay time: 30sec Synchronize the time Siren volume: 2 Siren ringing time: 5min Disarm password: 1234 In the X500 Alarm App press the following button:... -
Page 13: Store Emergency Telephone Numbers
Store emergency telephone numbers In the X500 Alarm App, this setting can be done as follows: Emergency numbers are the telephone numbers which have to be called when the alarm goes off. To get a list of the current settings, send “5“ to the control panel. -
Page 14: Store Sms Number For Rfid Tags
Store SMS number for RFID tags Store speed dial number The SMS number for RFID tag is the number which will be used to send a text message In this menu you can assign a phone number that will be stored as speed dial number. to when a RFID tag is used to disarm the system. -
Page 15: Change Sensor Name And Zone Mode
Change sensors name and zone mode Each sensor is referred to as a zone. 50 sensors' name and and zone mode can be In the App: changed according to personal preference. Each sensor(zone)' name is not allowed to exceed 30 characters. Zone 1 name: Zone 1 alarm Zone 1 type(0 , 1 , 2 , 3 ):... -
Page 16: Change Rfid Tags Name
Change RFID tags name Change entry/exit delay time With this menu you can adjust the names linked to the RFID tags. 20 RFID tags can be The system can be armed or alarmedwith a time delay. When a delay time is set you renamed. -
Page 17: Setting Alarm Volume
Setting alarm volume Setting alarm duration Alarm volume of the siren can be adjusted in this menu.The default setting is low. Alarm duration of the siren can be adjusted in this menu. Thedefaultsettingis5 minutes. Left is the response message of the alarm Siren volume (0 Mute, 1 Low, system shown when texting “121“... -
Page 18: Set Disarm Password
Set disarm password Setting single zone delay time The system will be delayed to alarm if single delay zone sensor is triggered. It is The default disarm password is 1234. To change the disarm password, follow the menu recommended to set the entry door/window contact in single delay zone. below: Left is the response message of the alarm Left is the response message of the alarm... -
Page 19: Set Duress Code
Set duress code Set timing The default duress code is 1111. Duress code can be used when the user is threatened Below is the response message of the alarm system shown when texting “16“ to the to disarm the system. When using duress code to disarm the system, the control panel control panel. -
Page 20: Delete Wireless Sensors By Sms
Delete wireless sensors by SMS In the App, you can remove the sensors, RFID tags and remote All sensors can be removed from the system by texting “21“ to the SIM card number in controls separately: the control panel. Delete wireless sensors successfully. Delete all RFID tags by SMS Restore system to default setting All RFID tags can be removed by texting “22“... -
Page 21: Sms Notification Of Low Battery Sensors
SMS notification of low battery sensors Connect new RFID tags Enter the password and press the button on the control panel. The button lights up. Control panel: It sends out an SMS "Control panel low battery", meanwhile the LCD Now you can hold a RFID tag in front of the RFID reader on the control panel. When screen flashes once every 1 second to notice user. -
Page 22: Accessories
Arm (Away arm) Accessories Accessories in this kit can work only with its own control panels. In arm state, the system will trigger an alarm when detecting intrusion. Press the [Arm button. The control panel beeps once and the mode LED is on, Remote Control indicating the system is in the arm state. -
Page 23: Home Mode
Home mode (Part arm) Mute operation You can arm and disarm the system silently. In home mode, detectors setting to home zone are in disarm state; the other detectors are still in arm state. That is, you can move freely in the home zone area; however, the Press the [Stay ] button, the LED indicator on the remote control flashes once, and rest areas are still being protected. -
Page 24: Test And Install The Door/Window Contact
Test and Install the Door/Window Contact Test the door/window contact This is to test whether the contact can work properly. The contact contains a transmitter and a magnet, which can be mounted on a door, window, or any object that can be opened or closed. When the transmitter and 1. -
Page 25: Install The Door/Window Contact
Install the door/window contact Test and Install the PIR Motion Detector Make sure the contact works properly before installing it. There are triangle marks on The detector adopts digital dual-core fuzzy logic control processing technology and the side of the transmitter and magnet. Make sure the triangle marks is close to each intelligent analysis algorithm, effective resolution of interfering signal and human other and within the range of 1 cm. -
Page 26: Working Mode
Working mode Test the PIR motion detector Testing mode This is to test whether the PIR detector works normally. After self-testing, press the test button, the detector switches to the 1. Remove the insulating strip 2. Arm the system testing mode and detects once every 10 seconds. -
Page 27: Install The Pir Motion Detector
Install the PIR motion detector 3. Test the PIR motion detector After making sure the detector works normally, do as follows: Press the test button at the back. It switches to the testing mode and sustains for 3 minutes. Walk in the detection scope and observe the LED. When human movement is 1. -
Page 28: Installation Notices 49~50
Installation Notices 3. Avoid facing to glass windows or doors Pay attention to the following during installation: Strong light interferes with detection sensitivity. In addition, complicated 1. Mount the detector to a location close to the entry or exit situations, such as traffic flow, stream of people, also should be avoided. -
Page 29: Technical Specifications
Technical Specifications Control Panel MD2300 PIR Motion Detector Power Supply Power Supply DC 3V (1.5V AA batter y x 2) 12V DC 500 mA GSM Frequency 850 / 900 / 1800 / 1900 MHz Standby Current ≤... -
Page 30: Ds2300 Door/Window Contact
DS2300 Door/Window Contact RE2300 Remote Control Power Supply DC 3V (CR2032 lithium cell battery x 2) Power Supply DC 3V (CR2032 lithium cell battery x 1) Standby Current ≤ 1 uA Transmit Current ≤ 9.5 mA Alarm Current ≤ 10.5 mA Transmitting Distance ≤... -
Page 31: Troubleshooting
Troubleshooting When the X500 alarm system is not working properly please try following solutions: Make sure the inserting direction of SIM card is right Make sure inserting the SIM card first before powering on Reason/Solution Problems The control panel Check whether the SIM card is GSM standard... -
Page 32: Caution And Warnings
(serious) injuries. Whether the SIM card has enabled Caller ID Display function Get replied SMS Repairing the unit must be done by smanos qualified personnel. The warranty expires “Phone number is unauthorized. ” Whether the cell phone number is set as alarm number immediately if the unit is repaired and/or when the product is misused. -
Page 33: Terms Of Warranty
The warranty doesn’t apply when incorrect or improper use, external influences and/or opening of the housing has been done by parties other than smanos. - Page 34 X500 258x185mm 129x185mm 胶粘64P OI-X500-EN-1404-V1.0...
Need help?
Do you have a question about the X500 and is the answer not in the manual?
Questions and answers