Sony PVM-2530 Service Manual page 63

Rear panel
PVM-2530
----- 1
H CENTER (DIGITAL RGB)
(horizontal centering) control screw
--- 2
V HOLD (vertical hold) control screw
W
NEW DYNAMIC COLOR select switch
RM-739
[I]
NOTCH select switch------
[[) DEGAUSS button----------
[]] CONTROL select switch----------
[I]
H CENTER (DIGITAL RGB) (horizontal centering)
control
When the picture of DIGITAL RGB input is distorted
horizontally, correct it with this control.
[ll
V HOLD (vertical hold) control
When the picture rolls vertically, correct it with this
control.
f _ i ]
NEW DYNAMIC COLOR select switch
Normally set to ON, which makes it possible to obtain
natural skin tone and ''blueish white".
[!]
NOTCH select switch
Normally set to OFF.
To eliminate notches forming along the horizontal
boundary between the colors, set this switch to ON.
T.C. Corp
1
o
No
rth Main St
Wnarton
NJ 07885
wwvv
.servicernanuals.net
- 7
~
[I]
DEGAUSS button
Push this button for more than 5 seconds to demagnetize
the screen.
(Just a touch may make the screen more magnetized.)
Wait for
10
minutes or more before activating this button
again.
[I]
CONTROL select switches
Normally set to ON.
REMOTE CONTROL switch
Set this switch to ON to control the monitor with a
Remote Commander.
If this switch is set to OFF, the remote control is not
possible.
MANUAL CONTROL switch
Set this switch to ON to control the monitor manually.
To make the manual control of the control keys or
switches on the front panel impossible, distinguish the
indicators by pressing the CONTROL key on the front
panel and set this switch to OFF.
(However remote control is possible if REMOTE
CONTROL switch is set to ON.)