Sony PVM-2530 Service Manual page 64

PVM-2530
RM-739
Connectors
SYNC ON GREEN select switch
CMPTR (computer) connector (25-pin, D-sub)
[I]
CONTROLS connectors
W
LINE A/LINE B--- --
75-ohm termination switch
VIDEO IN connector (BNC type)
VIDEO OUT connector (BNC type)
AUDIO UR IN jacks (phono jack)
AUDIO UR OUT jacks (phono jack)
[IJ
SYNC ON GREEN select switch
When an RGB input source is connected to CMPTR
connector, set this switch to:
ON to synchronize with the sync signal on G-signal.
OFF to synchronize with H.N. sync signal or composite
sync signal.
II]
CMPTR (computer) connector (25-pin, D-sub)
Connect to a microcomputor with digital or analog RGB
outputs.
For the pin assignment, refer to SPECIFICATIONS.
lJj
CONTROLS IN/OUT connectors
Connect to the CONTROL S connectors of a VTR or
several monitors.
It is then possible to control the system with a single
Remote Commander.
W
LINE A/LINE B
VIDEO IN connector (BNC type)
AUDIO l/R IN jacks (phono jack)
Connect to the video and audio outputs of a VTR or a
camera.
VIDEO OUT connector (BNC type)
AUDIO l/R OUT jacks (phono jack)
Loop-through outputs of the IN connector and jacks.
Connect to the video and audio inputs of another monitor.
75-ohm termination switch
When only the VIDEO IN connector is used (nothing is
connected to the VIDEO OUT connector), set this switch
to ON.
When both connectors are used together for a loop-
through connection), set this switch to OFF.
-8-