ZXSDR RSUC User Manual
Figure 5-16 Antenna Feeder Jumper Installed Completely
The RF jumpers go out from the base, as shown in
Figure
5-17. The cables between
cabinets must be protected with protective tubes, without any exposed part of the cables
and the openings at two ends of these cables must be sealed, as shown in
Figure
5-18.
Figure 5-17 Lead-Out of the Antenna Feeder Jumper
5-16
SJ-20101019140047-002|2012-03-15 (R1.1)
ZTE Proprietary and Confidential